BNC home lightning protection protector, control signal, lightning protector, surge protector.
Product introduction
The control signal lightning protector is a lightning protection measure adopted by Zhejiang tol Electric Co., Ltd., which is independently developed and manufactured for signal circuit protection. The control signal lightning arrester is mainly used to protect the lightning (overvoltage) along the low voltage control signal circuit, so as to protect all kinds of voltage connected control signal equipment which are sensitive to electromagnetic interference.
Product features
1. the low attenuation and return loss in the wide frequency range ensure that the lightning arrester does not affect the system performance.
2. core components are strictly screened and their performance is superior.
3. low insertion loss to ensure unblocked lines
Use attention,
1. temperature: -40 to 70 DEG C; relative humidity: less than 95%; atmospheric pressure: 70kPa ~ 106 kPa.
2. Connect the protector to the front end of the protected device, so it must be connected reliably.
3. the lightning arrester is not required for long maintenance without longer maintenance. It only needs to be maintained by the system. In the course of use, the signal transmission is problem and the signal transmission is restored to normal after the surge protector is replaced, indicating that the surge protector has been damaged and needs to be repaired or replaced.
Product specification
| Model and specofocation |
|
TRSS-BNC |
| Working voltage |
|
24V |
| Max continuous operating voltage |
Uc |
30V |
| Voltage protective level |
Up(V)〈 |
〈60 |
| Nominal discharge current |
In(8/20μS) |
10kA |
| Response time |
ns |
≤10 |
| Characteristic impedance |
|
75Ω |
| Insertion loss |
|
≤0.1dB |
| Configuration dimension |
|
52×25×25 |
| Interface mode |
|
BNC |
| Operating condition |
|
Temp:-40℃~+70℃ |
| |
RH≤95%(25℃) |
| |
Sea level elevation≤3km |
| Remarks |
|
Other max continuous operating voltage can be customized |
Working principle of product
The control signal surge protector is connected to the front end of the protected equipment. When the transmission line is impacted by the inductive thunder and other transient overvoltage, the impact current is discharged to the earth through the protection branch of the surge protector, and the output voltage is placed in the allowable voltage range of the equipment, thus ensuring the safety of the operating equipment.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
Product Tags:
|
|
10KA 24V Signal Surge Protector BNC Interface Mode Low Insertion Loss Long Service Time Images
|
